 |
|
| Small Wheels | Points | Cones | Blocks
and Sticks | Straight Wheels | Kits
| |
|
|
| Small Wheels | Points | Cones | Blocks
and Sticks | Straight Wheels | Kits
| |
Cratex Cones Cratex Cones are the best answer to many
difficult deburring, smoothing and polishing problems. They are easily shaped to contour
while being used or by using a Cratex conventional dressing tool.They are ideal for
cleaning and polishing grooves, ball corners, flares, angles and other hard to reach
surfaces as well as for use on molds, dies, castings, combustion chambers and ports,
stainless steel tanks, shafts, turbine blades, and many others.
Cratex Cone Mandrel - Part
No. 1341 Maximum Safe Speed is 20,000 Revolutions Per Minute. Best results are usually obtained at 30% to 80% of Maximum Safe Speed. Use a light work pressure. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cratex Rubberized Abrasives Cones are designed to
fit Cratex Cone Mandrel No. 1341, 1/4" Shank. Maximum Safe Speed 20,000 Revolutions
Per Minute with 1/2" overhang or less (exposed mandrel length). For each additional
1/4" of overhang the Maximum Safe Speed is decreased by at least 20%.